What is the easiest way to do this and fill all of the other holes. Kind of hesitant to weld them shut as that metal is rather thing I'm worried about warping the metal.
Fox Gt Wing On Lx Hatch
- Thread starter Bill88Stang
- Start date
-
Sponsors (?)
I welded mine shut 12 years ago. It's been fine with a Saleen wing. Still smooth.
I'm about to redrill them though to put the LX wing back on
I'm about to redrill them though to put the LX wing back on
+1, if you take your time with the welding and just do a little on each hole until they're filled, you should be ok.
Just turn the temp down a bit on your welder and keep zapping each hole a little at a time. Once the holes are welded shut though, don't kid yourself, you'll have to straighten it (bondo). It's wavy as sht under that spoiler.
I once filled holes on a deck lid with por15 epoxy. Sold the car 2 years later and no issues. It's kind of hack but, I was younger and didn't know any better..
Similar threads
