Identify this differential

[brianproctorla]

Here is a ford nine inch center section.
I know this isn't a trac-lok based on the 3/4 bolt size and the fact that the bolts are not inset.
I know this isn't a equi-lok because the metal around the bolts isn't rough.
I haven't physically seen the differential, so I can not spin the axles.
The seller believes it is a locking rear.
Does this look like a spool?


http://a506.ac-images.myspacecdn.com/images01/116/l_87b2a47c6526215af8fff58faf560c61.jpg

 

[96 DOHC Cobra]

From the picture, it looks like either an OPEN rear or a MINI SPOOL. No kind of traction lok, equa lok, Detroit locker or anything else.

 

[brianproctorla]

Thank you very much!
-Brian

 

[302 coupe]

It's not a ford trac-lok (no countersunk holes), or a detroit locker(detroit has no cross pin), or a powertrax no-slip(4 cross pin). It could be number of other things, but theres no way of telling by looking at that picture.

 

[brianproctorla]

Thank you.
The detroit locker information is quite helpful.
I know very little about detroit locker identification, so this helps a lot.

 

[67efivert]

im willing to bet its a mini spool