Long time no see everyone

89tang

Founding Member
Oct 20, 2000
2,508
0
0
Newark ohio
Long time no see everyone A few VIDS and Pics

Been almost a year since i been on here i usually hang out on clubgp or LS1tech now. Got my mustang done finally, dynoed it a few months ago blew a head gasket due to, too much timing. My fault i had the timing locked out at 20* and the dyno tuner wanted the spout connector in i wasn't paying attention lol. Still made 425rwhp on a blown gasket with 30+ degree's of timing :nono:. But i got it finished up this last week i'm gonna run it a few weeks and if it stay's together i'm going to shoot some spray to it, around a 50 shot.

Here's a few vid's they are big so it'll take awhile to download, so if you got dial up forget about it, right click save as works quicker.

Idling
http://www.ezarchive.com/89tang/AlbumSpace/TDZXJ1G3Z/_zid-1708682/MstangSC.mpg

Drive down the road
http://www.ezarchive.com/89tang/AlbumSpace/UVHC4576Y/_zid-1725232/MstangSCD.mpg

Here's a few vid's of the TA after i modded it these vids are not as big as the other 2. At the track i was launching off idle and gradually laying into the gas cause of bald tires. I wasn't able to even get to WOT till the top of 2nd gear had i been able to it woulda went 11's on the spray easily. You can see how the GTO in the 2nd run out launched me by 2-3 carlengths that's how easy i was taking off and the spray wasn't hitting till the bottom of 3rd on that run and the next run. The 1st run was without spray too incase no one could tell by the MPH. I was spraying a 75shot that night also.
Dyno Day
http://www.ezarchive.com/89tang/AlbumSpace/2LFVGCUOIW/_zid-908081/TAdyno.mpg

First track runs
http://www.ezarchive.com/89tang/AlbumSpace/RAXNFS2WQ/_zid-968981/TrackTA2006.mpg
 
  • Sponsors (?)


And here's some pic's of the GTP i thought i'd throw a few Ford parts on it so it would look better.

Picture 155.jpg


Picture 154.jpg
 
iwashmycar said:
wow...did those bolt right up?

Yup no modification, crazy huh

The mustang center bore is 70.5mm, GP is is 70.3 so you can use a hubcentric ring but it's not needed there are alot of ppl. with GP's that run mustang wheels with no ring and are fine. GP's bolt pattern is 5x115 Mustangs are 5x114.3

I see your in columbus you been to Dyno tune motorsports?
 
right... who are u again?
lol

J/k i remember u welcome back for the time being, alot has change round hurrrr... we got me, strype(changed from hoodstrype), daggar is a mod, my bad70 and several others with CTs, there is an annoying little 14 yr old kid that posts bought his spark plug wires on his v6... j/k ... but seriously. Then we got a kid rollin on dub spinners on his stang, then we got alot more ppl. The list goes on and on... u missed a lot
 
Sounds like i missed alittle, i just came back to show some vid's of the car these are alittle be large but i can't compress them down anymore. I'll post some races and stuff in the near future.