Expired Lots Of Nearly New An Fittings -6, -8,-10,-12,-16

Discussion in 'Fox Body Mustang Engine and Power Adder Parts For' started by RacEoHolic330, May 19, 2013.


  1. RacEoHolic330

    RacEoHolic330 I like to dress like a pretty girl SN Certified Technician

    Joined:
    Mar 5, 2003
    Messages:
    3,346
    Likes Received:
    487
    Trophy Points:
    123
    Location:
    Allentown, PA
    Selling a number of different AN fittings. All of these fittings are nearly new and were just used during engine mockup. The -12 and -6 have been hose mounted. The rest were just loosely tightened down by hand. Most have no scratches. Some marks on the -12 fittings. None of the fittings have ever seen fluids.

    I decided on a color change, so these have to go. Paypal accepted. Cover the fees or pay as a gift. The fittings prices are not negotiable, but the shipping is. The more you buy, the more you save on shipping.

    -6AN
    FPS -6 x 3/8” MPT 90 degree - $8
    FPS -6 x 3/8” MPT straight - $3
    FPS -6 straight (2 available) - $4
    FPS -6 45 degree (2 available) - $10

    -8AN
    FPS -8 tube nuts & sleeves (4 pairs available) - $2/pair
    Aeroquip -8 x ½” MPT straight adapter (2 availble) - $3
    FPS -8 female T swivel on run (2 available) - $20
    Aeroquip -8 male union - $4
    FPS ½” NPT female T - $15
    Aeroquip -8 45 degree female swivel - $14
    Aeroquip -8 push-lock straight - $4
    Aeroquip -8 x ½” MPT 90 degree adapter - $6

    -10AN
    Aeroquip -10 push-lock straight - $5
    Aeroquip -10 push-lock 90 degree - $12
    Aeroquip -10 45 degree - $17
    Aeroquip -10 straight - $6

    -12AN
    Aeroquip -12 straight (3 available) - $8
    Aeroquip -12 120 degree - $18
    Aeroquip -12 90 degree (2 available) - $16

    -16AN
    Jegs -16 90 degree (2 available) - $18
    Earl’s -16 straight - $14

    Reducers
    Aeroquip -8 to -10 male reducer (2 available) - $5
    FPS -8 nut x -6 male reducer (2 available) - $5

    I also have some -12 hose, and some 1/2" aluminum tubing. All the -8 fittings were used to convert the heater tubes on my 88 to AN with aluminum tubing. If you are interested in doing the same, let me know. I attached a picture below.

    PM or e-mail me if interested. [email protected]

    [​IMG]
    [​IMG]

Share This Page