lovin this 03 cobra steering shaft

[juiced_94gt]

I have also done a remanufactured rack with new inner tie rods. Steer outer tie rod ends(bumpsteer kit). Hoping to freshen it all up. But nothing has helped.

I have this EXACT same problem...REMAN rack, steeda bumpsteer, and BRAND NEW 03 Cobra shaft and still have play in my steering...What gives???

 

[Engel]

wierd, what about your ball joints

 

[WhiteDevil]

PA Racing tubular K-member and 03 cobra A-arms which came with new ball joints. I basically redid my whole front suspension.

 

[Adam95GT]

maybe there is some play in your head or arms???? :SNSign:

 

[Guero]

i dont know but i like the play on my steering. I feel like if its to tight. any movement cuz make you loose it. but that just me

 

[juiced_94gt]

wierd, what about your ball joints

stock 200k ball joints...will these make a difference?

 

[Engel]

im not sure it will fix the slop, I know that the steering shaft is supposed to fix slop.


you know at 200,000 miles its not gonna get any worse by putting a new one in, i mean other then the stock transmission (stock hp levels) I dont think any part can handle 200,000 miles. I worry about my oil pump.. as its the only thing that I have not replaced at 200,000 miles (and passenger side window motor)..

maybe somone can chime in as to the symptoms of worn ball joints..

 

[milewsky80]

maybe somone can chime in as to the symptoms of worn ball joints..

My pass. side one was so bad it squeked or sometimes grinded when I turned or compressed the suspension. Turns out the dust boot ripped and let water in the socket and it rusted. New cobra arms fixed that right up. But, while taking the old ones off I saw that my front springs were broke so on went the bullitt kit. My problems seem to snowball when i try fixing them