Mach 1 rear window tint

Discussion in 'Mustang Sound & Shine All' started by ptim, Dec 7, 2003.


  1. ptim

    ptim New Member

    Joined:
    Dec 3, 2003
    Messages:
    30
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Florida
    Has anyone tinted the windows on there Mach 1, and if so, how did the back glass come out, did the tint seal properly at the top.

    Thanks,
     
    #1
  2. Ryan02Stang

    Ryan02Stang Active Member

    Joined:
    Jun 17, 2003
    Messages:
    1,202
    Likes Received:
    0
    Trophy Points:
    36
    Location:
    Arlington Heights, Illinois
    I believe the mach 1 has the same rear window as a GT. There are two options when tinting the rear window.

    1. Tint over the dot matrix and it will look ok but you will be able to tell the tint is not perfect at the top.

    2. Tint and stop right before you get the dot matrix and put a piece of black vinyl on the outside of the window. This is what I have done and it looks great...you cannot see the vinyl unless you are looking close and you do not see that crappy dot matrix. :nice:
     
    #2
  3. DSG 56

    DSG 56 New Member

    Joined:
    Dec 11, 2003
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    San Bernardino, CA
    I had my tint shop put the vinyl INSIDE the rear window to cover the dot-matrix and then limo tint the rest, and it came out great.
     
    #3
  4. 1fast03pony

    1fast03pony Member

    Joined:
    Jul 1, 2003
    Messages:
    766
    Likes Received:
    0
    Trophy Points:
    17
    Location:
    New york

    where can i get this vinyl, and for how much?

    thanks
     
    #4
  5. ryanrule

    ryanrule impotent Founding Member

    Joined:
    Feb 11, 2002
    Messages:
    1,437
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Madison, WI
    its just a regular piece of black vinyl, ask the tint place
     
    #5
  6. mustangrfast88

    mustangrfast88 Founding Member

    Joined:
    Sep 22, 2002
    Messages:
    331
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    middletown ohio
    another way to tint over the dot part of the wind do is to take a fine sand paper and sand them all flat to the glass and then tint ever them but it takes awhile but it looks good or you can just get the vinyl like everybody eles is saying to do and i would put it on the inside instead of the outside
     
    #6

Share This Page