Electrical Maf Pigtail ???'s

Discussion in 'SN95 4.6L Mustang Tech' started by flstang65, Aug 9, 2014.

  1. As stated in a previous post, some rodents chewed through my MAF wires. I am going to the junkyards on Monday to look for a pig tail and housing to repair mine. Since Mustang GT's are kind of scarce in the yards out here, my question is; can I use any pigtail from a 2V 4.6 with COP ignition or, does it need to come specifically from a Mustang? If I can pull one from any 2V 4.6 COP engine then, that will open me up to a much easier search.
     
  2. Forgot to mention, mine has 6 wires so, I would assume that as long as I snag one from a 6 wire MAF then, I should be good.
     
  3. Search for the part number on line then see if they match up with other cars. That is how I found the harness for my IAC.
     
  4. I was going to try that or, just take good pics of the wires in my car and go to the yard and make sure the colors match up to whatever car I pull them out of. I was just curious if anyone knew off the top of their heads.
     
  5. Looks like I am limited to 2002-2004 Mustangs only for the housing and wiring.