March FOTM Tiebreaker
- Thread starter foxmustangman
- Start date
-
Sponsors (?)
skunk21
Active Member
.
just4bob50
Active Member
haha- boo, here i am. 
thanks for the nomination
Im on here from time to time but mostly read the threads. Been busy this winter and havnt been on much. Between the new house, work, and going back to school i dont have much time for anything.
DMAN302 - Love your car! Nice wheels!!! Are you buddies w/ Spence?
As was stated above- my car has in incon twin turbo setup on it. Most people in person miss the turbos.
Just for those that dont know-
SPECS:
R302 block (306cu)
Trick Flow intake and Heads
Custom Comps Cam
Incon 800 TT kit with intercooler
Aeromotive 1000 fuel system with sumped tank
55 lb injectors
SCT Chip
D&D Viper Spec 6 Speed
McLeod Twin Disc
Currie Enterprises 8.8 w/9" endcaps
3.27 gears/ Posi/ 31 spine axles
Baer Brakes
Griggs K-member
Griggs control arms
MM torque arm
Griggs lower control arms
Griggs Pan-hard bar
Koni Yellows and Griggs coil overs on all 4
thats the basics
Right now its making 563 RWHP and 610RWTQ @ 13psi
Uprgading very shortly to a DFI stand alone and 72lb injectors, New cutch, and more boost
Thanks for letting me know about the post Sam-
Check out the May issue of Modified Mustangs Magazine... My cars on the front cover!!
:SNSign:
thanks for the nomination
Im on here from time to time but mostly read the threads. Been busy this winter and havnt been on much. Between the new house, work, and going back to school i dont have much time for anything.DMAN302 - Love your car! Nice wheels!!! Are you buddies w/ Spence?
As was stated above- my car has in incon twin turbo setup on it. Most people in person miss the turbos.
Just for those that dont know-
SPECS:
R302 block (306cu)
Trick Flow intake and Heads
Custom Comps Cam
Incon 800 TT kit with intercooler
Aeromotive 1000 fuel system with sumped tank
55 lb injectors
SCT Chip
D&D Viper Spec 6 Speed
McLeod Twin Disc
Currie Enterprises 8.8 w/9" endcaps
3.27 gears/ Posi/ 31 spine axles
Baer Brakes
Griggs K-member
Griggs control arms
MM torque arm
Griggs lower control arms
Griggs Pan-hard bar
Koni Yellows and Griggs coil overs on all 4
thats the basics
Right now its making 563 RWHP and 610RWTQ @ 13psi
Uprgading very shortly to a DFI stand alone and 72lb injectors, New cutch, and more boost
Thanks for letting me know about the post Sam-
Check out the May issue of Modified Mustangs Magazine... My cars on the front cover!!
:SNSign:
