Mass FLO EFI 4-Barrel EFI Setup

Discussion in 'Engine and Power Adder' started by taj362, May 24, 2011.

Thread Status:
Not open for further replies.
  1. Includes a Mass Flo 4-barrel throttle body, proprietary Mass Flo mass air meter, Mass Flo computer and Mass Flo Chip. It is calibrated for 36# injectors, has a 7500 RPM rev limit, and a re-calibrated timing curve. Can be re-calibrated for different injectors, rev limit, etc by removing the chip and sending it to Mass Flo. Will also send stock 02 sensors and barometric pressure sensor with it. These parts are essentially new. They have maybe 30 minutes run time on them. Everything works perfectly. $1100.

    Thanks,
    Tom

    1oGSv.jpg

    XDMMq.jpg

    vsk5M.jpg

    XlwCz.jpg

    3vneO.jpg

    SlJJ6.jpg
     
  2. do you still have this? what did you do for injector harness?
     
Thread Status:
Not open for further replies.