My new stripes.....

Discussion in '2005 - 2014 Specific V6 Tech' started by echo7, Aug 14, 2005.


  1. kevins05v-6

    kevins05v-6 New Member

    Joined:
    Mar 31, 2005
    Messages:
    330
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    West Palm Beach FL
    #21
  2. afixer

    afixer The Informant

    Joined:
    Apr 3, 2005
    Messages:
    384
    Likes Received:
    0
    Trophy Points:
    0
    when i installed mine i cleaned the area with naptha about 8 times (detailers use it to remove the wax ) and i used a clean rag every time. then i used my lazer (the type that spins) and shot down the whole car. then i laid 3/4 blue tape and ran it down both sides of the lazer line. i used the install fluid keep everting really wet. and i used a hair dryer to dry the edges (mine wrap around) also at the roof front you need to use your squeegy and pull the front rubber seal forward and let the stripe tuck under it. they also say you shouldnt wash or wax for about 3 days. took me and my son about 5 hours. it was alot of work but it was worth it. next month im going to my friend and we are going to paint them on.
     
    #22

Share This Page