Need help finding member with 87-93 f/b with 2002 Interior...

[agirlbeatyou]

I posted awhile back about wiring 02-03 front seats in my f/b, a stangnet member helped me out with a pic of the wiring... now I need help with the rears.. does anyone know this member or....


Have you put 99-newer seats in your F/B? How did you intall the rears? I know it takes alot of modification .. Help thanks!!!

 

[mrbizkitt]

http://www.corral.net/photopost/showphoto.php?photo=1644&cat=500&page=1

http://www.corral.net/photopost/showphoto.php?photo=1647&cat=500&page=1

Here is couple of pictures. For me, I just took the skins off and put them on the 93 frame/cushion. Then while they were out of the car, I used .40 safety wire to pull, tweak and adjust the skins from underneath the seat. Once in the car you can't see the wire and there are no wrinkles in the leather!!! I believe some have actually had the leather cut and re-sewn. I figured I would give it a shot this way first, and it came out real nice.

 

[04sleeper]

I did this with my 89 coupe with 2000 GT seats.

For the back I had to trim some metal off the bracket on the rear part. like this.

 

[04sleeper]

Then I insulated the area behind the back seat and then bolted up the bracket to the rear seat frame.
View attachment 516788


You will have some room on the sides if you are installing it in a coupe that needs to be filled. I was going to take the factory back seat and trim off the side of the foam to have the correct shape and then have it covered in matching material to fill in this gap but I sold the car before doing it.
Like this.
View attachment 516789
View attachment 516790

 

[04sleeper]

As for the bottom seat cushion. I had to cut out some foam and bend the brackets down to sit the seat down more to the floor. Then got a peice of wood and cut it to fit the front between the floor and the seat covered it in matching carpet and bolted it to the floor and seat to attach the bottom.
View attachment 516786

Here is the wiring diagram for the front seats again.
View attachment 516787

It's not really that hard to do. Just some work.

 

[agirlbeatyou]

THANK YOU ALL SOOO MUCH!!!!!!!! I think Ill try the taking off the skins.. as I have a h/b fox and not the coupe!!

I work at blueovalperformance.net and all ford performance. We had a huge open house . check it out. thanks

http://forums.stangnet.com/showthread.php?p=4993714#post4993714

(thats me in the pink at the bbq)

 

[04sleeper]

No problem. Glad to try to help.