NEED HELP NOW!!!

[95Mustang302]

Ok, I have deal on a tremec found and it comes with a centerforce clutch, problem is I don't know if that clutch will work with a sn95 since i'm assuming it was for a fox. I really need to know as soon as possible if the clutch will work with my car.

Thanks in advance!!

 

[HISSIN50]

A fox clutch should work on your 94-95 GT.

 

[95Mustang302]

see that just confusses me as to why the 94/95 has a seperate part number

 

[urban96]

i think it should work, only difference is the trans/bellhousing and since the one in question comes with that i dont see it as being a problem

 

[bill302]

what kinda tremec...t-5 or tko500 ect...

 

[95Mustang302]

tko500

 

[1TallMF]

Should bolt right up. Only thing is if it came off a fox, you'll need a 5/8" driveshaft spacer. Y'all correct me if I'm wrong now, y'hear

 

[ProKiller]

check out punisher302's thread. A TKO500 is just a newer version of the T3550. most things are pretty much the same as far as i've heard.

 

[95Mustang302]

hey did the 3550 ever come with a 31 spline output shaft?

 

[bill302]

you will need a 31 spline output shaft,fox body clutch fork, driveshaft spacer and a tranny mount relocator....when i installed mine i bought the parts from d&d performance they can answer all your questions they do this install everyday....ask them about the clutch heres a link.....http://www.ddperformance.com/

 

[Green 94 5.0]

the clutch assembly for a fox is the exact same as an sn95. as long as the clutch disc is made for the correct spline count on the input shaft of the trko500 (it came in either 10 spline or 26 spline) it will fit with no problem.