Expired Parting Out Built 95gt

Discussion in 'Drivetrain Parts' started by d_dogg07c, Jun 19, 2012.


  1. d_dogg07c

    d_dogg07c Member

    Joined:
    Dec 26, 2003
    Messages:
    154
    Likes Received:
    0
    Trophy Points:
    17
    Location:
    sparta,tn
    complete part out of a 95 mustang.car has

    edelbrock performer rpm heads with comp magnum rockers and arp head bolts 900.00 for all including hardened pushrods.

    trick flow silver street heat upper and lower intake 225.00 all bolts included

    pro m mass air meter for 24lb injectors sn95 style with 24lb injectors sold

    bbk 65mm sn95 throttle body 75.00

    bbk unequal shorty for sn95 125.00,matching h pipe 50.00

    sn95 5speed trans with bellhousing thats been welded adjustable cable with firewall adjuster.trans doesnt grind and is tight and smooth sold

    8.8 rear with discbrakes and 4:11 gears good posi unit sold

    e303 camshaft 100.00

    rebuildable stock shortblock 175.00 with lifter holders and spider

    black ford racing plug wires 30.00 on has an msd end on it

    5lug front spindles,hubs,rotors,calipers sold

    engergy susp mount sold

    maximum motorsports caster cambers sold

    i also have fenders doors anything except interior
    #1
  2. Eric Francis

    Eric Francis New Member

    Joined:
    Jul 1, 2012
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Houston, TX
    do you have the computer for sale? also i am looking for alluminum drive shaft, and tubular k member if you had any of those on your ride?
    #2
  3. RonBurgandy

    RonBurgandy Member

    Joined:
    May 29, 2012
    Messages:
    35
    Likes Received:
    0
    Trophy Points:
    7
    Do you still have them and how many miles on the injectors? All in good working order? Im deff interested in them.


    Sent from my Bio Bionic
    #3
  4. d_dogg07c

    d_dogg07c Member

    Joined:
    Dec 26, 2003
    Messages:
    154
    Likes Received:
    0
    Trophy Points:
    17
    Location:
    sparta,tn
    i have computer,injectors are sold
    #4
  5. d_dogg07c

    d_dogg07c Member

    Joined:
    Dec 26, 2003
    Messages:
    154
    Likes Received:
    0
    Trophy Points:
    17
    Location:
    sparta,tn
    ill do 900.00 on heads,rockers,bolts,and pushrods BUT THEY ARE NOT PRO MAG ROCKERS,i read receipt wrong,once i tore it down i found they are std comp magnum rockers with roller tip not full roller,the heads are the 1.9/1.6 valve performer rpm,arp bolts,hardened puchrods, very good buy for all this and ill do 250.00 on intake or buy heads and intake 1000.00 for it all
    #5
  6. d_dogg07c

    d_dogg07c Member

    Joined:
    Dec 26, 2003
    Messages:
    154
    Likes Received:
    0
    Trophy Points:
    17
    Location:
    sparta,tn
    list updated with lower prices
    #6
  7. Road_Runna

    Road_Runna Member

    Joined:
    Dec 23, 2002
    Messages:
    548
    Likes Received:
    0
    Trophy Points:
    17
    Location:
    Ogden, UT
    Do you still have the driveshaft yoke (yoke) definatlly interested.
    #7

Share This Page