Prothane Urethane Bushings Front Lca

Discussion in 'SN95 4.6L Mustang Tech' started by ItsStock02, Jun 25, 2013.


  1. ItsStock02

    ItsStock02 Member

    Joined:
    Aug 19, 2008
    Messages:
    496
    Likes Received:
    4
    Trophy Points:
    19
    Im replacing the bushings on my front LCAs this week. The poly bushings I bought came with new sleeves. Should I have the old sleeves pressed out and replaced with the new ones or just press the new bushings into the old sleeves?
    #1
  2. Rusty67

    Rusty67 Well-Known Member

    Joined:
    Dec 3, 2002
    Messages:
    3,608
    Likes Received:
    13
    Trophy Points:
    59
    Do you have hydro bushings or regular bushings ?
    #2
  3. ItsStock02

    ItsStock02 Member

    Joined:
    Aug 19, 2008
    Messages:
    496
    Likes Received:
    4
    Trophy Points:
    19
  4. Rusty67

    Rusty67 Well-Known Member

    Joined:
    Dec 3, 2002
    Messages:
    3,608
    Likes Received:
    13
    Trophy Points:
    59
    I posted on how I did my bushings a long time ago. They were regular. The bushing comes out with the metal sleeve. The new bushing goes in fairly easily. I can try and dig my post up about how I did it if you want.
    #4
  5. ItsStock02

    ItsStock02 Member

    Joined:
    Aug 19, 2008
    Messages:
    496
    Likes Received:
    4
    Trophy Points:
    19
    If you don't mind that would be great.
    #5
  6. Rusty67

    Rusty67 Well-Known Member

    Joined:
    Dec 3, 2002
    Messages:
    3,608
    Likes Received:
    13
    Trophy Points:
    59
    #6

Share This Page