Q's for 69 guys with 70 bolt in glass.

Discussion in 'Classic Mustang Specific Tech' started by streetgrande69, Dec 14, 2003.

  1. streetgrande69

    Founding Member

    Joined:
    Nov 2, 2002
    Messages:
    975
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Splendora, Tx
    GOT A FEW QUESTIONS ON THE BOLTIN GLASS SWAP I DID TODAY. I JUST DID THE DRIVERS SIDE SO FAR(THE ONE THAT FELL OFF THE TRACK). IT WON'T ROLL ALL THE WAY DOWN. I USED THE (sorry about the caps) anyway, i used the 69 regulator and i think the 70 regulator is different, is that true? everything else works great.

    also where can i get a set of window seals for a 70. the ones that go between the front and rear glass that go on the quarter window. i haven't found repos. thanks..
     
    #1
  2. bnickel

    Founding Member

    Joined:
    Aug 21, 2002
    Messages:
    5,642
    Likes Received:
    0
    Trophy Points:
    77
    Location:
    lubbock, texas
    when i did mine, i had the same problem, it turned out to be the rubber bump stop, afetr i trimmed it about 1/2" the window went all the way down, check that first, as far as the window seals they are being re-produced now, i think daniel carpenter is making them, the chrome piece is different story, check on 70 cougars as they don't seem to picked over as well at the boneyards
     
    #2

Share This Page