Progress Thread Raceoholic330's Restoration Thread. Dart 331, Turbo, Irs, Etc...

Discussion in '1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-' started by RacEoHolic330, Nov 14, 2011.


  1. RacEoHolic330

    RacEoHolic330 I like to dress like a pretty girl SN Certified Technician

    Joined:
    Mar 5, 2003
    Messages:
    3,359
    Likes Received:
    595
    Trophy Points:
    153
    Well, I knew I was going to run into my first major problem sooner or later. I just didn't expect it to be with the wheels. The rears don't fit. The tires stick out 1/4" past the fenders. Looks like we missed the mark on the backspacing. This is the first 9" wheel that True Forged has done on a fox with IRS, so we were kind of shooting from the hip as far as backspacing was concerned. I had the tires removed and the rear wheels will be going back on Monday. With the way the wheels are cut, there's no meat left on the hub pads to mill them down. The center sections will need to be cut out of the hoops and new ones will need to be made. I need a whole 1/2" additional backspacing, which is huge as far as wheels are concerned. Hopefully this change doesn't bankrupt me.
  2. MikeH686

    MikeH686 Mine is only two inches though.

    Joined:
    Oct 12, 2011
    Messages:
    1,937
    Likes Received:
    354
    Trophy Points:
    94
    Dam n Scott that sucks hate to hear about that I think there's ways to measure it but it's way to complex lol
  3. RacEoHolic330

    RacEoHolic330 I like to dress like a pretty girl SN Certified Technician

    Joined:
    Mar 5, 2003
    Messages:
    3,359
    Likes Received:
    595
    Trophy Points:
    153
    I used a backspacing measuring tool. Apparently it was a lying POS. However, the number I got was only 1/10" more than what TF was recommending, so I went with it. I don't expect them to fix it for free, but hopefully they are willing to work with me.
    MikeH686 likes this.
  4. MikeH686

    MikeH686 Mine is only two inches though.

    Joined:
    Oct 12, 2011
    Messages:
    1,937
    Likes Received:
    354
    Trophy Points:
    94
    Yeah way I did it on past vehicles is mock up a set of random wheels and figure it from there but I figure yours is a different story
  5. GroverDill

    GroverDill GoldMember

    Joined:
    Aug 19, 1999
    Messages:
    4,764
    Likes Received:
    294
    Trophy Points:
    114
    That blows anus.
  6. madspeed

    madspeed Colonel Mustard Mod Dude Founding Member

    Joined:
    Nov 30, 1999
    Messages:
    8,020
    Showcase:
    10
    Albums:
    1
    Likes Received:
    1,125
    Trophy Points:
    174
    What he said
  7. MikeH686

    MikeH686 Mine is only two inches though.

    Joined:
    Oct 12, 2011
    Messages:
    1,937
    Likes Received:
    354
    Trophy Points:
    94
    Hey no one is blowin anus around here! That's just weird
  8. bird_dog0347

    bird_dog0347 Active Member

    Joined:
    Jun 8, 2012
    Messages:
    130
    Likes Received:
    30
    Trophy Points:
    39
    That does suck man, but when you get them back and they fit correctly, maybe you can share the final specs with everyone here so guys like me know exactly what fits best. It's good that you found out now though and not when it was the last thing to go on and keep you from driving it.
  9. madmike1157

    madmike1157 the humor is still lost on me SN Certified Technician

    Joined:
    Nov 30, 1999
    Messages:
    3,703
    Albums:
    1
    Likes Received:
    856
    Trophy Points:
    154
    I gotta say that does suck.

    Weird how we both had measurement related fk up's that ended in do-overs.
    W/ me it was the axles,...and despite the fact that I measured the spacing between the wheels like I have done a million times before ,...this last time ended up w/ me paying 200.00 to have stock axles shortened to the point of them being unusable. I did get a pretty good break from Moser on the replacement hardened axles though,... maybe you'll get a similar break from your wheel supplier.
  10. RacEoHolic330

    RacEoHolic330 I like to dress like a pretty girl SN Certified Technician

    Joined:
    Mar 5, 2003
    Messages:
    3,359
    Likes Received:
    595
    Trophy Points:
    153
    I sure hope so Mike. It was a stretch just buying 4 wheels. For what they cost, I need to be 100% satisfied with them. They aren't even close right now. Hey, at least the fronts fit.
  11. 84Ttop

    84Ttop They make new pistons every day, so why worry? SN Certified Technician Mod Dude

    Joined:
    Jul 3, 2009
    Messages:
    3,048
    Likes Received:
    1,215
    Trophy Points:
    144
    Pictures of the fronts to make everyone in this thread less sad???
  12. RacEoHolic330

    RacEoHolic330 I like to dress like a pretty girl SN Certified Technician

    Joined:
    Mar 5, 2003
    Messages:
    3,359
    Likes Received:
    595
    Trophy Points:
    153
    Oh, about the fronts. Yea. I was looking at them last night and realized the froot loops at Firestone installed one of the directional tires backwards. I'm bringing it back tonight for them to fix. Wtf.
    stangboy and 88LX5.Oh like this.
  13. 84Ttop

    84Ttop They make new pistons every day, so why worry? SN Certified Technician Mod Dude

    Joined:
    Jul 3, 2009
    Messages:
    3,048
    Likes Received:
    1,215
    Trophy Points:
    144
    fruit* but who is keeping track....

    That sucks those idiots couldn't even put the tires on right!
  14. RacEoHolic330

    RacEoHolic330 I like to dress like a pretty girl SN Certified Technician

    Joined:
    Mar 5, 2003
    Messages:
    3,359
    Likes Received:
    595
    Trophy Points:
    153
  15. 84Ttop

    84Ttop They make new pistons every day, so why worry? SN Certified Technician Mod Dude

    Joined:
    Jul 3, 2009
    Messages:
    3,048
    Likes Received:
    1,215
    Trophy Points:
    144
    Didn't realize we were quoting Tucan Sam... Apologies...
  16. 88LX5.Oh

    88LX5.Oh Advanced Member

    Joined:
    Dec 31, 2011
    Messages:
    1,454
    Likes Received:
    210
    Trophy Points:
    74
    It's not like directional tires have arrows on them or anything to show which they they're supposed to roll.
    TOOLOW91 likes this.
  17. MikeH686

    MikeH686 Mine is only two inches though.

    Joined:
    Oct 12, 2011
    Messages:
    1,937
    Likes Received:
    354
    Trophy Points:
    94
    That's just a mere suggestion @88LX5.Oh
    88LX5.Oh likes this.
  18. tamadrummer88

    tamadrummer88 Active Member

    Joined:
    Aug 19, 2005
    Messages:
    586
    Likes Received:
    73
    Trophy Points:
    39
  19. rdharper02

    rdharper02 Member

    Joined:
    May 8, 2006
    Messages:
    435
    Likes Received:
    19
    Trophy Points:
    19
    It could be worse......maybe not. Honestly sorry to hear, I'm enjoying seeing your progress. Your one of the few who seem to make consistent progress.
  20. RacEoHolic330

    RacEoHolic330 I like to dress like a pretty girl SN Certified Technician

    Joined:
    Mar 5, 2003
    Messages:
    3,359
    Likes Received:
    595
    Trophy Points:
    153
    You're right, things could always be worse. At least the fronts fit!

    No updates for right now. I changed the oil and I'm ready to start it up again. It will probably have to wait until next weekend though. I've just been busy with other things lately.

Share This Page