?`s about cams for npi

[98MACH1R]

i have the pi intake swap coming with the plates and im getting my npi heads ported and polished with a 5 angle job,new valves,and everything, now should i go with pi cams or should i go with something else, any recomends? i want some more top end and because have a 100 shot with 3.73`s, and one more will i need a tune or something special since that is a lot of air being flowed? and with all this will it produce more #`s than a pi swap?

BTW please i dont wanna hear about that i should of just did the pi swap:Zip2:

 

[98blackmagic]

How about custom grinds since you have NOS and the PI intake?

 

[98MACH1R]

bump

 

[DropTopPony]

call comp cams and tell them what you just told us! They don't charge anymore for different grinds. And the comp 265h is a good NPI cam if you don't want to call.

 

[STANGateURlilSS]

How about custom grinds since you have NOS and the PI intake?

the best way to make power is always with a custom grind.. that is made just for your application.. i would give comp a call.. and ask what they say..

 

[Mel96GT]

The PI cams are a cheap way to get some top-end. They will tach to about 5700+ rpms but the low-end will be almost the same. However, if price is no object go with a set of custom grind cams.

 

[o0akoni0o]

just curious why you're not going with the pi heads since you're going to be spraying. i mean p&p npi heads are gonna flow just as good as pi's, but the juice will love the high compression.

 

[TGJ]

The Comp 262 AH cam( PI 262 ) grind would work real well for you. You would need Comp or Crower springs to run that cam.

You could go with the Comp 268 cam( NPI ) grind as well but I think you would be happier with the 262's.

 

[TGJ]

Also you would need to get the car tuned. You would make more power than a PI swapped car.