spark plug and gap size?

[moneypit94]

I had some NGK v-racing spark plugs in gapped to about .035
I beleive i just burnt one up. What would be another good plug to put in my car.

Its making a little over 9 lbs of boost with approx 9.7:1 compression

Motorcraft 22Cs, Autolite 3923s have been recommended before. But there was a little controversy on being the right heat range...

What gap size?

 

[U_BN_BIT]

I've always ran the Ford Motorcraft plugs and never had a problem.

 

[onebad95]

:OT: Nice little web page moneypit. I posted my times just now.


Did you have any problems with the blower install. I think I'm gonna start to do mine in mid to end of Jan. Maybe.

 

[moneypit94]

:OT: Nice little web page moneypit. I posted my times just now.


Did you have any problems with the blower install. I think I'm gonna start to do mine in mid to end of Jan. Maybe.

everything went fairly smooth. Bending the steal AC lines sucked. The discharge hose that vortech supplied didn't come close to fitting right. I had to have a piece of 3" exhaust bent and modded. The only other real mod i had to do was reposition my smog pump delete pully over an inch so that the belts didn't rub.

Just give yourself plenty of time to actually do it. Seems like everything takes longer then it should. I had planned to have it done in a weekend and that didn't happen...

Thanks for the complement on the website. Its my first attempt and i have no experience with any of the software. I just sorta figure it out as i go.