Our long awaited Boss 302 specific cold air intake is now on our website. Orders placed now should start shipping in the next few days. As good as the Boss 302 Mustang is, there is still room for improvement and we have found it. Improving on the factory airbox was difficult but we pulled it off. The intake can be ordered by itself for those that already own a tuner or as package with an SCT XCal 3. Custom tuning is required due to the much larger MAF housing. Peak to Peak gains of up to 28hp and 22ft/lbs of torque have been achieved, with point to point gains of as much as 32 horsepower and 25 ft/lbs of torque! Our testing was done on what were otherwise bone stock Boss 302's. Outside of the cold air and tune, no other modifications were performed, even the inserts for the side pipes were in place. Cold Air Intake: http://www.steeda.com/store/boss-mustang-cold-air-intake.html Cold Air and Xcal3 Tuner: http://www.steeda.com/store/boss-mustang-power-pak.html Thank you to everyone who has been patiently waiting for this! Also, for those interested make sure you are using the follow system on this forum to follow me and all the posts I make for new parts, tech, and promos!