steeda g-trac bar

Discussion in 'Fox 5.0 Mustang Tech' started by wiggy's5.0, Dec 9, 2003.


  1. wiggy's5.0

    wiggy's5.0 New Member

    Joined:
    Jul 14, 2003
    Messages:
    54
    Likes Received:
    0
    Trophy Points:
    0
    Anyone running the steeda g-trac bar on their stang? Thinking about snagging one, I already have steeda's subframes. Thought I'd work on the car's suspension before doing any other mods.Thanks.
  2. matm347

    matm347 Founding Member

    Joined:
    Aug 29, 2000
    Messages:
    2,056
    Likes Received:
    0
    Trophy Points:
    0
    I ran a 4-point G-load brace before I got Long tubes, it really helped stiffen the front end, especially when combined with the strut tower brace. Well worth the ~40-80 bux most companies are asking for them.


    Sponsored Ad

  3. BarnStang

    BarnStang Founding Member

    Joined:
    Mar 2, 2001
    Messages:
    1,238
    Likes Received:
    0
    Trophy Points:
    37
    Location:
    Hagerstown, MD
    I have one. Used all Steeda parts. You have to drill the holes to mount it. But when combined with the strut tower brace it made a noticble difference in handling and cornering.
  4. nito88stang

    nito88stang Founding Member

    Joined:
    May 24, 2002
    Messages:
    2,017
    Likes Received:
    0
    Trophy Points:
    46
    Location:
    Fullerton, California
    VERY good mod. Really makes a difference in the turns even moreso than a STB (at least for me it did). But yeah, drill two holes. And if you have an AOD you'll have to move the tranny lines up a bit.

Share This Page