Steeda offset Control Arm Bushings

[89roadster]

http://www.steeda.com/products/steeda_off_set_a_arm_busings.php

Anybody ever used them? Will they work with 245/45/17 wheels up front with the 89 fender wheel opening (Stock 2000 GT wheels)?

Thanks.

 

[90blacknight]

Yes, I have them on two stangs. On my 90 I run 245/45/17 on an ROH 8.5 inch wheel at the front and I don't have to crank the wheel fully to get them to rub on the inside. But for the most part I am happy with them. I'll probably go with a slightly smaller tire next time. On the 88 I run a 225 at the front, mounted on ponies, no problems.

 

[89roadster]

Yes, I have them on two stangs. On my 90 I run 245/45/17 on an ROH 8.5 inch wheel at the front and I don't have to crank the wheel fully to get them to rub on the inside. But for the most part I am happy with them. I'll probably go with a slightly smaller tire next time. On the 88 I run a 225 at the front, mounted on ponies, no problems.

Great - thanks!

Were they worth it? Did you notice a difference?

 

[90blacknight]

Noticeable difference and well worth it IMO.