Ok, my motor has 120+k on it and I was going to add a tmoss lower and thumper heads plus a cam (not sure which) if I were to rebuild and build a 347 stroker would those heads and intake work, not just work but work really well? or would I be wasting money in the thumper heads and tmoss porting???
stroker with thumpers and tmoss
- Thread starter old_blue
- Start date
-
Sponsors (?)
TIMMY2734
Founding Member
That would not be an ideal setup. Youve got to think bigger, which unfortuneately usually means more money
Yep, a 347 needs to breath more to work "really well" as you put it. If you put them on a 347 it would work but wouldn't make good power above mid range.
It would be a torque monster for sure! It would still make plenty of power, but if your going to spend that on a 347, might as well spend that much for the top end.
thumper460
Founding Member
Actually there are a few 11 sec N/A 347s on my Ported stock valve size E7s ... but for MORE power ..yes a larger flow numbers will help above 5500 rpm!! cool?? and the low speed velocity will still rock with that stroke!!
Just me............................
Thumper
Just me............................
Thumper
Similar threads
