SOLD Terminator Cobra Built Right 3.4 Whipple

Status
Not open for further replies.

waynebuilt

Member
Jul 31, 2013
19
4
14
Clean title
55k on chassis
Ice cold ac & power steering
Interior 10/10
Exterior 10/10
This car has been hand built

Exterior
Torch Red ppg deltron clearcoat*
True 3stg Show Paint job Glasruit base
Shaved side scoops!!!!!
Mint 17x9 Satin oem SVT wheels
Fornt Continental pro 255/40/17
Rear Mickey Thompson et streets 275/40/17 about 75 miles
HID headlights and fog lights

Interior
2004 cobra dark suede insert seats front/rear
AEM wideband and Autometer boost gauges on pillar
Kenwood double din indash TV/DVD player(touchscreen)
Billet AC knobs
Billet window switches
Billet e-brake handle

Suspension
UPR tubular k member and a-arms
Strange 10way shocks with UPR 175lb coilovers
Maximum Motorsports bump steer kit
UPR offset poly rack bushings
UPR 4 bolt caster/camber plates
Maximum Motorsport sub frame connectors
Steeda upper and lower non adjustable control arms
Steeda drag launch rear springs
Tokico rear drag shocks
Steeda adjustable rear sway bar
1/2" k member spacers installed and 1/2" tranny spacers
Brembo front brakes

Powerplant
3stg radar blue engine bay
753 rwhp on e85 tuned @ RET by Greg*
Second tune e85 26 psi metco+4 lower 911rwhp
Fully built and balanced short block by Parrish Automotive 600 miles on entire setup
Stock block bored .20 and lined honed!
ARP main studs
Stock cobra crank with the oil journals filleted for better oiling!
MMR forged H-beam rods with ARP 2000 bolts
Manley -18cc dished forged pistons with tool steel wrist pins
MMR oil pump with billet gear
Maximum Motorsports oil relocation kit
Stock revised heads with NO tick! Stock cams
Powder coated cam covers
3.4 Whipple blower with 3.5 pulley
LFP SbTB
JLT high boost intake
SCT ba2600 maf with zone 5 MAFterburner
LFP heat exchanger
LFP supercharger tank
Metco lower with stock size pulley(also have a +2)
Billetflow silver idlers and snub idler
Lethal performance Head cooling mod
MAC ceramic coated longtubes
Bran new oem header hardware and gaskets
O/R xpipe
Bassani catback
All zero gauge wires from batt+ to alt and fuse block
All zero gauge wires from batt- to chassis and engine block
Zero gauge battery relocation kit

Fuel system
Sumped tank with custom fuel level sender
-10an to filters and pump with -8 feed and -6 return
2 aeromotive filters with stainless elements for E85
New Holley billet 1400hp fuel pump
Aeromotive a1000 fuel regulator
Fore black fuel rails
Siemens deka 80lb injectors

Drive-train
T-56*Spec stage 3+
D&D 26 spline input
MGW orange handle shifter with stock knob and MGW snake knob
Stifflers performance driveshaft loop
Superior 31 spline axles and FFRP diff
2001 Bullitt SRA

Torch Red Cobra walk around - YouTube
3.4 Whipple Cobra 2nd gear roll testing MT et street's - YouTube




IMG_20130804_115554.jpg
20130804_115031.jpg
IMG_20130804_115646.jpg
-5-1-1.jpg
20130611_191405.jpg
20130714_171402.jpg
20130726_0058071.jpg

Pm for pictures of the build, paint ect. 818-646-9039 text please
$30k obo open to trade as well located in so cal
 
Last edited:
  • Sponsors (?)


Status
Not open for further replies.