The get rid of the junk in your garage thread!

#41
[QUOTE='66 coupe]If anyone has a driver's side GT foglight houseing let me know. Mine is brownish.[/QUOTE]
I thionk someone said they had the foglight housings. Make a quick look. Im pretty sure I saw it.
 

  • Sponsors (?)


#45
Wow, looks like I have a ways to go for collecting unwanted car stuff...

So far:

-Stock headlights and corners (mint)
-Brand new GT foglight brackets (didn't need them)
-Stock tape deck/radio
-Black plastic distributor cap cover thingy

Later in the spring time I should have laying around:
-Stock intake
-Stock TB
-Stock valve covers
-Stock strut tower brace
-Stock rear lower control arms
-Slightly (surface) rusted Mac EL headers
-Stock intake tubing and air box
-Stock driveshaft
-Factory speakers and amp
-Stock spare tire (too small for 13" brakes)
-Front stock calipers and front and rear rotors
 
#46
1TallMF said:
Wow, looks like I have a ways to go for collecting unwanted car stuff...

So far:

-Stock headlights and corners (mint)
-Brand new GT foglight brackets (didn't need them)
-Stock tape deck/radio
-Black plastic distributor cap cover thingy

Later in the spring time I should have laying around:
-Stock intake
-Stock TB
-Stock valve covers
-Stock strut tower brace
-Stock rear lower control arms
-Slightly (surface) rusted Mac EL headers
-Stock intake tubing and air box
-Stock driveshaft
-Factory speakers and amp
-Stock spare tire (too small for 13" brakes)
-Front stock calipers and front and rear rotors
Click to expand...
Ill take thos headers off your hands when you dont need them. :D
 
#47
1TallMF said:
Wow, looks like I have a ways to go for collecting unwanted car stuff...

So far:

-Stock headlights and corners (mint)
-Brand new GT foglight brackets (didn't need them)
-Stock tape deck/radio
-Black plastic distributor cap cover thingy

Later in the spring time I should have laying around:
-Stock intake
-Stock TB
-Stock valve covers
-Stock strut tower brace
-Stock rear lower control arms
-Slightly (surface) rusted Mac EL headers
-Stock intake tubing and air box
-Stock driveshaft
-Factory speakers and amp
-Stock spare tire (too small for 13" brakes)
-Front stock calipers and front and rear rotors
Click to expand...


Dude hook me up with some nonn crusty head lights... mine are nasty
 
#49
parchisi said:
the engine and transmission worked perfectly when I took them out of the car at 123k miles. The only problem might be that the engine has been sitting openly with no intake or timing chain cover, so more than likely there's crap in the head ports, in the lifter valley, and possibly in the oil pan.

Oh yeah, for your swap I also got the flywheel, the belhousing, clutch fork. Its just junk sitting in the garage. If anybody wants any of this stuff though, you'd have to wait until thanksgiving when I go home to it.
Click to expand...

If you don't mind shipping it to PA I could really use the stuff [especially the transmission]. Please let me know :hail2:
 
#53
1, 28 spline stk axle shaft
A Mac cold air kit,whats left of it, after the Procharger.
Stock shifter
Stock Cobra Cam
Stock push rods
Full set of roller lifters with 45,000 on them.

I've also got the complete Mach 460 system. But I want to sell that. if anyones looking make offer.
 
#54
cobra259 said:
1, 28 spline stk axle shaft
A Mac cold air kit,whats left of it, after the Procharger.
Stock shifter
Stock Cobra Cam
Stock push rods
Full set of roller lifters with 45,000 on them.

I've also got the complete Mach 460 system. But I want to sell that. if anyones looking make offer.
Click to expand...

Hey, maybe I can take whats left of that CAI kit off your hands.
If you could take a pic that would be awesome.
 
#55
parchisi said:
the engine and transmission worked perfectly when I took them out of the car at 123k miles. The only problem might be that the engine has been sitting openly with no intake or timing chain cover, so more than likely there's crap in the head ports, in the lifter valley, and possibly in the oil pan.

Oh yeah, for your swap I also got the flywheel, the belhousing, clutch fork. Its just junk sitting in the garage. If anybody wants any of this stuff though, you'd have to wait until thanksgiving when I go home to it.
Click to expand...

damn, i wish i knew this when i did my swap in the spring. i think i paid around 500 for all that random crap, and 1100 for a rebuilt(upgraded) t-5 even rebuilding the used one would have saved me 500 bucks if thre was a junk 94-95 within 200 miles from me:bang: that extra grand could have been a set of gears and upper/lower manifold:bang:
 
You must log in or register to reply here.

Similar threads

Chythar
SN95 Looking for Southern California Mustang Owners
Replies
1
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
AeroCoupe
AeroCoupe
7
For Sale Cobra II part out
Replies
4
Views
1K
Mustang II Parts
2Blue2
2Blue2
G
1983 GLX Convertible 5.0 5-Speed 4BBL 'Barn Find' - 82,000 original miles - Restoration Motivation Needed
Replies
10
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
General karthief
General karthief
fun331
87 LX 'Vert
Replies
18
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
fun331
fun331
2000xp8
Time for a new clutch
Replies
110
Views
9K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
2000xp8
2000xp8
Top Bottom
Back
New
Hot
Menu