upper console help

Discussion in 'Classic Mustang Specific Tech' started by vobraman, Dec 11, 2003.


  1. vobraman

    vobraman New Member

    Joined:
    Dec 2, 2003
    Messages:
    145
    Likes Received:
    0
    Trophy Points:
    0
    Ok I have an upper console with the front bracket. The car is a 67 coupe.
    Here is my problem, How do I mount this thing ? The two screws in the back screw into what ? I plan on cutting the headliner and putting the front bracket in. What does this bracket attach to ?
    Help !!!
    thanks
    Brian
  2. Edbert

    Edbert Founding Member

    Joined:
    Jul 14, 2002
    Messages:
    3,445
    Likes Received:
    1
    Trophy Points:
    59
    Location:
    Austin TX
    There are small sheetmetal brackets on cars that came with overhead consoles. Both of my Fastbacks had them as did my coupe. My current car is a soft-top so I cannot help you with pics. I do not think that the brackets were there on all cars though (there would have been no reason for it). If you do not have them between your headliner and the roof you should be able to fab some up. That would be a good time to replace the headliner too :)
  3. 67GTCOUPE

    67GTCOUPE Founding Member

    Joined:
    Dec 20, 2000
    Messages:
    653
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Land of Ice and Snow
    Actually in the coupes....there is a bracket at the front only, the rear screws into a roof cross member.

    Ebay has the brackets or a scrap yard.

Share This Page