Went to track tonight,,need your help

[rsw007]

with the stock tranny with shift kit and stock converter with ac,ps it went 14.00 flat

 

[WantaGT]

man i hate you with a passion

 

[rsw007]

wantagt email me a list of your mods [email protected]

 

[tmoss]

my car ran best @ 34# with Flowmasters, ported intake and 13* timing

 

[rsw007]

hey tom, yeah everyone thinks they need more fuel. but the stock bolt on motor needs less. ford runs a safe mix from the factory. still undecided about porting intake tom going to atleast try to get a 13.29 with an unported motor

 

[willys1]

with the stock tranny with shift kit and stock converter with ac,ps it went 14.00 flat

LOL,,,,dam bro I think you have a freak motor,,LOL,,Im getting 28/10.5/15 et streets Monday,and Im putting the stock h-pipe on next week.Then Im going to the track on the 16th,I'LL be sure to post my times ,OH,Im also gonna lower my FP to 34lbs.,rite now its back up to 40.It was 38.

 

[rsw007]

are you spinning off the line?
if not dont step tire size, i run a26.5x8.5 tire and cut 1.7 60fts that bigger tire is going to take more power to turn

 

[willys1]

are you spinning off the line?
if not dont step tire size, i run a26.5x8.5 tire and cut 1.7 60fts that bigger tire is going to take more power to turn

Nope there slicks,well DR's.Hoosier Quick Time Pros.They are 26/9.5/15's

 

[rsw007]

if your not spinning then the bigger tires are only going to slow you down "rotating mass"

 

[willys1]

if your not spinning then the bigger tires are only going to slow you down "rotating mass"

If I dont heat them up they will spin!! But thses things have a nice bite after a burnout.