which spindles??

[fordguy87]

I just ordered 5-lug chrome 03 cobras and was wondering what spindles i was going to need to do the front conversion. I know the 94-95's will work but will any later ones work or maybe a V6 ... thanks guys!!

 

[Juiced88Coupe]

Use the 94-95 ones. V6's are the same as the v8's.

 

[srothfuss]

if you need some send me a PM. I have a full pair of 1995GT spindles / rotors and calipers in my garage.

 

[urban96]

i also have a set of 99+PBR calipers and a set of 95 calipers. both from a GT. see sig for the PBR's



whats the difference from 94/95 to 96+ spindles?

 

[Daggar]

whats the difference from 94/95 to 96+ spindles?

8mm per side.

 

[Mustang5L5]

Also slightly different suspension geometry for better toe-in and reducing bump-steer.


The 96-04 spindles are an upgrade over 94-95 spindles in the SN95's, its just that the offset isn't that ideal for Fox's.

A lot of aftermarket k-member/aarm/coil over kits recommend the 96+ spindles.

 

[urban96]

8mm per side.

in or out?

 

[dbdragracing]

out

 

[fordguy87]

Would I have to get different calipers if I did the 94/95 spindle/rotor swap or could i just use my stock ones for now?

 

[Shakerhood]

You would be switching to 5 lug, so yes you will need SN95 Rotors and you best bet on Calipers if $ is a concern would be 99-04 PBRs