Will I damage anything?

[mustang70]

I managed to get my stereo wired up today. I found the amp turn on wire and that was the only thing holding me back. Anyway, I didn't wire the lows through the preamps on the HU since I'm going to install a sub and want to use those for the amp that's going to drive it. So right now I have the tweeters and 5x7's running off the four channels coming out of the HU. I know this drops the load down to 2 ohms. Will I damage my HU if I keep this configuration? Thanks.

 

[zcs626]

how does using your HU drop the speakers down to a 2 ohm load?

 

[mustang70]

If I ran each speaker by itself it's 4 ohms. But running two spealkers off the same channel drops it down to 2 ohms. There's less resistance in the circuit.