will these rockers work ??

[Mac-man]

will these rockers:

Crane Cams 44746-16 - Crane Energizer Pedestal Mount Roller Rocker Arms - summitracing.com

fit under stock valve covers with an e-cam ?? i am just curious as i am looking for some new rockers, since the ones on my car are pro-form and wont clear with me trying to get rid of the motorsport valve covers to put the factory ones back on.

thanks

 

[Bullitt95]

The Crane 1.7 rockers will fit just fine under the stock valve covers. I have exactly the same ones under mine.

 

[Maryland Stang]

I have a "B" cam (less lift than an E) and I had to modify my breather baffle. I have the stock aluminum covers. If you have the steel Cobra type covers they should clear.

 

[Mac-man]

i have taken out the baffles in my covers, so i am hoping they will clear. thanks for the help guys

 

[Mac-man]

this is going to sound completely stupid but do i need to use shims with these rockers or can i just torque them down like the factory ones ?? the heads have not been milled or anything of that nature, and i know the proform rockers didnt have shims nor have i used shims with stock rockers

mike

 

[Maryland Stang]

I recommend that you check the valve train geometry anytime you go to a non stock cam. You may need the shims, you may not. There are many threads explaining how to check the geometry here at Stangnet.