Hey guys. I would like a MAF calibrated for 24 lb injectors. It has to be compatible with a Fox or 94-95 5.0 style 4 pin connector and it has to work with the EFI style OBD-1 ECU (not the same as modular style OBD-2 ECU). I prefer Pro-M but I am open to consider others. Sorry but I am not interested in an aftermarket sampling tube with stock electronics or a stock Cobra MAF. And sorry but I don't need a set of injectors, I have about 3 sets. Please let me know what you have available. I am also in the market for a set of forged modular pistons. I'd prefer flat tops and they have to be .020 over. Items I am willing to trade are as follows: I have a set of 3.27 stock FMC gears for an 8.8 diff. I have 3 timing chain covers for Modular engines. One is for NPI 2V, one is for PI 2V, and I think one is for a 96-98 Cobra. I have a boost/vacuum gauge, an AFR gauge (not the wide band), and a couple sunpro engine temp gauges. I have a 96-98 stock Cobra MAF sensor. I have a 351W EFI lower intake. Please let me know if you have what I'm looking for. If you are interested in anything I have then let's make a trade. Otherwise I have cash...thanks!!