X pipe question....

[gtford86]

okay i know this might already be on here be need help!!

i just installed the BBK O/R x pipe on my car and the factory 02 sensors are to far back to reach the plugs....i have the mil eliminators already but what else is needed to reach the plug???

do i need to by that extension kit(use for long tube headers) (part number 1676 )

let me know

thanks....

 

[rickshaw]

I don't have an x pipe yet, but have done research on the site. someone correct me if I'm wrong but you should use the mil eliminators on the rear 02 sensors and the 03/04 years will need extenders to reach the front locations.

 

[gtford86]

really the front ones...i know i got one of the front ones in but the other one i did not yet tight fit.....i thought the extensions were for the rear 02's cause thats a father distance??? i need some help !!!

thanks

 

[eliteJAE]

what year is your mustang? gt?

03/04 need the extensions to reach out to the REAR o2's.

so get the extensions, and plug them in to reach out onto the rear o2's, and you should be good. If your car is not an 03/04 then theres something else wrong.

 

[gtford86]

okay thanks

it is an 04 now i plug the extensions into my Mils??? and everything is okay ...and my check engine light will be cleared??

The Mils are for the rear 02 correct???

 

[eliteJAE]

yes, you use the extensions to plug the original harness plugs that wouldve gone straight to your REAR o2's into your MIL eliminators.

so harness plug ---> extensions ----> MIL eliminator -----> o2's

and if your CEL/MIL light are from the rear o2's reading out weird because of the lack of cats, then yes, the light should go away if the MILs are properly installed.

 

[gtford86]

okay sounds good thanks for the help