Zex Traction Control Window Switch

Discussion in 'Fox 5.0 Mustang Tech' started by Slatco, Jun 4, 2010.


  1. Slatco

    Slatco New Member

    Joined:
    Jan 10, 2010
    Messages:
    28
    Likes Received:
    0
    Trophy Points:
    0
    So I am the process of installing a Zex nitrous kit along with their traction control window switch. My question has to do with shift RPM with the new setup. Currently in NA form, my shift light is set at 5000 RPM. Now with the nitrous will my car pull beyond that? Reason being the window switch deactivates at a selectable RPM and I don't want my nitrous shutting off before I am through the traps. Anybody have any advice for setting the deactivation RPM on a stock 302 w 3.73s?
  2. Slatco

    Slatco New Member

    Joined:
    Jan 10, 2010
    Messages:
    28
    Likes Received:
    0
    Trophy Points:
    0
    To answer my own question I am going to set the nitrous deactivation at the same RPM as the rev limiter and not use the "skip shift" feature that comes with it. Duh.


    Sponsored Ad

Share This Page