Current Setup-
Stock Catback
Vortech SQ Supercharger w/ Aftercooler
Classic Design Concepts Shaker
Steeda Supercharger Tune
Dual Fuel Pumps In-tank
Tremec T-56 6-Speed
Steeda Sport Springs
MAC Stainless Prochamber
Pro5.0 6-Speed Shifter
Pro5.0 3.73 Gears
Autometer Boost and Fuel Gauges
18X9 Bullitt Wheels
Goodyear G3 275/40s
MGW Accessories
Fiore Firewall Adjuster and Quadrant
(updated 12/23/04)
412 RWHP and 390 Ft/Lb Torque
-
MustangWeekly Article
- More Featured Pictures |
Sponsors:
Tremec Transmissions
Vortech Superchargers
Steeda Autosports
MAC Performance
MagnaFlow Exhaust
Pro 5.0
Classic Design Concepts
Autometer
MGW Accessories
Invinca-Shield
TopLine Mustangs
|
Tremec T56
6-Speed Transmission Install
With more power and steeper gears on our mind we set our sights on
Tremec's T56 6-speed transmission for Project Bullitt. The Tremec T56
handles high engine torque beautifully and the sixth gear helps get some
drivability back with PBullitt's 3.73 gears. We consulted with Tremec Transmissions and
they agreed that their T56 Tranny would be exactly what we needed
for our project car. |
More Reviews | Shop Online
|
MAC
Prochamber -
Dyno Results
One of the first things we did to our Project Bullitt was to remove the
stock H-Pipe and replace it with the MAC Pro-Chamber. There was a
noticeable difference with the change. The exhaust note we were able
to achieve was great. The Bullitt comes with Arvin mufflers stock
from the factory and the Pro-Chamber really woke it up. Off idle has
a nice quiet note but once you get into the throttle she comes alive.
Great modification for the car. You can see our dyno results
here.
|
More Reviews |
Shop
Online |
MIL
Eliminators
When you put on an off-road H-Pipe, MAC Pro-Chamber or X-pipes with or
without cats, your check engine light can come on. Your onboard
computer gets a false reading from the rear O2s. Pony Express
Performance has a solution to this problem with their
MIL Eliminators.
Installation is a snap. All you need is some cutting pliers,
electric tape, a soldering gun (not necessary) and a wrench to remove the
rear O2 sensors. These eliminators are offered at a great price and
are warranted free of defects for one year. |
More Reviews |
Shop Online |
Steeda
Tri-Ax Shifter
Who likes sloppy shifts? The new 3650 Tranny found in later 2001
Mustangs and all 2001 Cobras and Bullitts, is a great improved
transmission, but it feels as though the shift throws are even longer than
the older T45. To correct this problem, we decided to go with a
Steeda Tri-Ax shifter. Installation is straight forward and the
reward is well worth it. The change gives you and your car a new
attitude. A Mustang is about performance, the Tri-Ax takes it to the
next level. (full
article) |
More Reviews |
Shop
Online |
MGW Billet
Accessories
The 2001 Bullitt Mustang came with some great accessories from the
factory. But we wanted to make ours a little different from the
rest. We contacted MGW who are
known for their quality billet accessories. Enhancements include:
Shift Knob, A/C Knobs, Headlight Knob, Cigarette Lighter, Billet Fuel
Door, and their new Shifter Handle. All MGW accessories are CNC
machined and finished for the best look in appearance and wear.
Follow along as we modify our Bullitt | Billet
Interior Pieces |
MGW Shift Handle
| MGW Billet Fuel
Door | |
More Reviews |
Shop Online |
Invinca-Shield
Front End Protector
StangNet is in love with their new Bullitt Mustang. Wear and tear is
a great concern. One of the most noticeable things that can happen
to your Mustang is bug and rock damage to the front end. Some
solutions are to either put on a bra, which we feel just takes away from
the car and its image, or to just not drive it, and that is just nuts. :)
Now there is another solution. 3M's ScotchCal is a tough urethane
plastic that can withstand rocks, bugs and other flying objects.
Invinca-Shield
custom cuts this material to fit on the front all types of vehicles to
include the Mustang. If you want to protect your car without it
really showing, this is the way to go. |
More Reviews |
Shop
Online |
CDC Quad Lamps
The 2001 Bullitt Mustangs did not come with the standard GT driving
lights. However, we wanted something similar on our car. We
opted to go with the
Classic Design Concepts Quad Lights. Installation was straight
forward. Besides looking great in the day or night with these
European styled lights, they shine bright as well and are very effective
in helping you to see better. |
More Reviews |
Shop
Online |
| |
|
| |
|
