Everything You Ever Wanted To Know About Rims

Share this Post:

Balancing Wheels

1. Balance tire/wheel assembly according to the balancing machine’s recommended procedures including but not limited to eye protection.

2. To reduce tire wear, road noise and vibration, it is highly recommended that all four wheels be balanced dynamically.

3. Wheels are checked for lateral and radial run out before leaving the factory to minimize balancing problems. If you have problems balancing, review the instructions for wheel fit check. A suggested remedy to some balancing problems is to deflate the tire and rotate it approximately 180 degrees on the rim. Re-inflate the tire and rebalance.

Categories: Mustang Tech

Comments are closed.