anybody know the part # for a 90 5.0 t5 flywheel
- Thread starter 98cobrancali
- Start date
-
Sponsors (?)
Lefty44278
New Member
milner351
Founding Member
90 flywheel
I'm on the opposite end of the same problem.
I have a '90 stock flywheel that I was going to put back into the car in preparation to sell it, I'm keeping my billet steel flywheel, motosport clutch and lakewood bellhousing for the next project.
There seems to be some confusion on the 50oz / 28oz change, some say 50oz 157 tooth is late model, some say the 28oz is late model.
I only know one thing at this point, 164 tooth is old, 157 tooth is new.
Here are the casting and stamping numbers from my '90 flywheel, which is 13.25" diameter.
Does anyone have one of these in good shape (no heat cracks!) they'd like to sell?
Casting number : RF-E1ZR6380-AZA
Stamped number : E6ZR-AA 012 BL
I'm on the opposite end of the same problem.
I have a '90 stock flywheel that I was going to put back into the car in preparation to sell it, I'm keeping my billet steel flywheel, motosport clutch and lakewood bellhousing for the next project.
There seems to be some confusion on the 50oz / 28oz change, some say 50oz 157 tooth is late model, some say the 28oz is late model.
I only know one thing at this point, 164 tooth is old, 157 tooth is new.
Here are the casting and stamping numbers from my '90 flywheel, which is 13.25" diameter.
Does anyone have one of these in good shape (no heat cracks!) they'd like to sell?
Casting number : RF-E1ZR6380-AZA
Stamped number : E6ZR-AA 012 BL
So an E1ZR-6380-A2A flywheel is for a 10" clutch?
What's the P/N for the 86+ 10.5" clutch flywheel??
