4 Mustang II parts cars

Status
Not open for further replies.
Hey M II Guys,

I have 4 Mustang II's that I am parting out. Many good body parts, all southern salt free parts. I have 2 pair of V-8 manifolds. I have one 4 speed that is still bolted behind a four cyl in the red coupe parts car, so there should be everything there if you were doing an auto to 4 speed conversion. I also have a C-4 V-8 belhousing, and a V-8 4 speed bell housing for sale.

I also have a 1978 Mustang II V-8 car for sale. It has taken a few years to round up all of the original parts to put it back together. At last count, parts came off of 12 other M II's to save this one. This is a solid, salt free, Alabama car. Click on the link to view the pictures.
1978 M II For Sale
Call with your parts needs. 256-828-6848
 
  • Sponsors (?)


Manual brakes

I would have to say that I have never seen a Mustang II that came with manual brakes. Being that the front are discs, I don't think the factory would have made a manual brake M II, but I may be wrong.
To convert to manual brakes you would need to purchase from a parts house the appropriate length of manufactured steel bkake lines to extend the extra 8 or 10 " that the master cylinder would be moved back. You would also need to purchase a brake pedal "pin" or post that the manual push rod attaches to.
NewPedalPin.jpg

Mustang Steve has the pins available. The early Mustangers purchase this from him when they are converting to power brakes. You would also need a push rod from an early Mustang or Ford truck that has factory manual brakes. You will probably have to adjust the length of the rod to make the brakes function properly. I hope this info helps, and me personally would keep the power brakes on it.
 

Attachments

  • NewPedalPin.jpg
    NewPedalPin.jpg
    29.5 KB · Views: 333
I am looking for the latches for the rear side glass. I have the pop out glass. I may be willing to buy the enitre side glass as long as the latches are not broken. They seem to break easily during removal. Please give me a price and shipping.
 
I have 4 Mustang II's that I am parting out. Many good body parts, all southern salt free parts. I have 2 pair of V-8 manifolds. I have one 4 speed that is still bolted behind a four cyl in the red coupe parts car, so there should be everything there if you were doing an auto to 4 speed conversion. I also have a C-4 V-8 belhousing, and a V-8 4 speed bell housing for sale.

Do you have a double humb transmission crossmember for sale?
I also looking or a front right fender. Mine is a really rusted one.

Sent You a letter about these.
 
your parts that are needed

looking for left side door, front and rear fenders, for a 78 coupe
and any scoops, spoilers fender flares or cobra dams

hiya i am using parts from a parts 78 mustang then selling some of the parts you need like front fenders and the drivers side rear quarter and the driver door you need i am about an hour and half from chicago,IL and i can ship these but the door might be a lil exspensive i can be reached at 815-703-4062 Anthony :SNSign: :lol:
 
Brushed Aluminum Finish Dash panel

Do you have a decent brushed aluminum dash panel for preferably a non ac car? Just looking for the panel around the instruments. Any help is appreciated.

Frank
 
Parts

Hey Guys, Forgive me for not replying sooner. I've been real busy outside now that the weather is in my favor.

I don't have a Cobra II hood or any Cobra II parts.

I do not have a double hump crossmember

I don't have brushed aluminium dash panel/bezel

I probably have a right front fender and it is small enough that it would ship UPS, PM me for the details

I might have latches for the side glass.

I'll check on these items as soon as possible.
 
i need a rear bumper bad how much and for shipping to 61010 weight is around 45 pounds dimensions are 63 x 8 x 9 i measured this in a junk yard but bumper was toast i really need a rear bumper bad 6-16-07 found my bumper thanks for everyones help
 
My daughter has a 1978 Mustang II which we are trying to make look decent...Do you have the exterior door trim for the passenger side? (the one which is about half way up the door.
 
your door

looking for left side door, front and rear fenders, for a 78 coupe
and any scoops, spoilers fender flares or cobra dams

i still have the drivers door with glass available if its still needed for you i am in zip 61010 to figure your shipping .......with glass $70.00 +ship.........w/o glass $50.00 +ship
<a href="http://img227.imageshack.us/my.php?image=picsforebay2001qo7.jpg" target="_blank"><img src="http://img227.imageshack.us/img227/8817/picsforebay2001qo7.th.jpg" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a>:nice: door no longer available using for another project 6/21/07
 
instrument panel

Do you have a decent brushed aluminum dash panel for preferably a non ac car? Just looking for the panel around the instruments. Any help is appreciated.

Frank
i have one available aluminum driver shape not show quality but they can be had (the aluminum inserts) from mid-west reproductions for around 25 or so for a complete set instrument and pass side leave a way to contact you or we can set up a private ebay auction ,would rather just sell outright though that way i dont get any fees charged to me by ebay (98chevloves) ebay id to check my feedback since i dont come here too often just mainly mustangII.net and my name there is cobraIImeplease so let me know one way or the other just sitting in garage gettin older by the day :nice:
 
Status
Not open for further replies.