A post a day......

Had to put the 1994 Cobra through emissions again today. Had to pull the spout to get it to pass because it was over the NOx limit. I still do not understand why this essentially stock Cobra has so much trouble passing emissions.

Kurt
 
  • Sponsors (?)


Yeah, it was when I was in High school, so late 90s. You would sit in an emissions line for 2 hours waiting for your turn. By the time you got to the emissions test your car was overheating and loaded up, you couldn't pass.

Kurt
 
I remember back around 96 when I first started driving that Jacksonville had still had emissions checks but St. Johns county didn't have them so I was good. I can see why California does it because of all the pollution from being heavily populated, but FL isn't that bad..yet!
 
Yeah, down there there is no safety inspection, only emissions. The first 3 years I lived here I was officially a FL resident, and didn't have to deal with all that crap.

Kurt
 
How hard is it to pass Emissions anyway? I don't think mine would stand a chance at all with no smog and a fairly stout aftermarket cam. Ive been throwing around the idea of moving out west in a few years but the area I want to go to requires emissions but I also read that if you can get collectable car insurance you are exempt.
 
I custom made an H-pipe with 2 big Magnaflow cats. That's the only emission control device I run on the car when I go through emissions; No EGR, no smog pump. I don't put anything in the tank, and I make no adjustments to the fuel pressure or timing, nor do I pull the spout. It aces emissions every time. Last time it went through I did 10/182 on the HC, and 0% on the CO. It has more to do with your tune than anything.

I have collector car insurance, and I am not exempt. I think it has to do more with the age of the car than anything else. Here in GA, you are exempt when the car gets to be 25 years old. I can mail you my cat pipe in 2020.

Kurt
 
lol sounds good. If it comes down to it and I actually move there and have to pass emissions I'll have to fab up a pipe like that as well. Would it work with a pipe for long tubes if you put one at each end of the pipe?
 
Was out tooling around on the bike today and seen 2 stangs at the stealership....39.800 for one and the other was 37.300...W.T.F. is up with that???

The Black one had no less than 15 huge birds turds roasting on the paint....go figure...
 
Couldn't let this thread slip to the second page.

This week I felt like I had a regular job for a little bit. I had to do my online Pilot instructor refresher course, which is 800 minutes of surfing the internet while the program thinks I'm studying the material. That's done for 2 years, back to waking up to an alarm clock at 3:45am.

Kurt