11 sec GT40 build....
- Thread starter srtthis
- Start date
-
Sponsors (?)
Bottle mount
Started on the mock up. Really can't go to far with this till I get the purge solenoid
Working on bottle placement still. Think I'm going to make a seat bracket that bolts in place of the passenger seat and put the bottle there
Started on the mock up. Really can't go to far with this till I get the purge solenoid
Working on bottle placement still. Think I'm going to make a seat bracket that bolts in place of the passenger seat and put the bottle there
Not sure... It's the old one out of the race car. I'm not a fan of the standard mount.
just finished talking with one of the electrical engineers i work with about how to wire up everything. im going to start it tonight
as i go along i will take pictures and show whats connected to what so if some one likes the set up they can copy it.
how its going to work. when i stage the car i push in the clutch and the brake. hold the brake down. hit the button on my shifter which will turn on my line lock and my 2 step and will be held with the clutch till. (shifter button wont need to be held) the nitrous will be off. once the clutch is all the way out the nitrous will come on. as long as im between 3500-5700 rpm and at WOT.
as i go along i will take pictures and show whats connected to what so if some one likes the set up they can copy it.
how its going to work. when i stage the car i push in the clutch and the brake. hold the brake down. hit the button on my shifter which will turn on my line lock and my 2 step and will be held with the clutch till. (shifter button wont need to be held) the nitrous will be off. once the clutch is all the way out the nitrous will come on. as long as im between 3500-5700 rpm and at WOT.
Maybe... Gotta see how much moneys left over after all this. Buying another trans wasn't planned. But def need some type of different seat
True my buddy has a kirkey seat in his 89 gt even though he's bigger then me I could tell that seat just holds you tight which is nice.
not to bad... kinda like driving a carb when its cold but once it warms up its not bad. it had an issue when it got warm when id come to a stop the idle would hang around 2K till i revved on it real quick.
Was going to clean up the case but I didn't have any brake clean left and I'm sure it's going to be coming out soon. Wanted to take it out for a test spin but I seem to have missed placed the shifter bushing
Similar threads
