Baffled, my 289 A code - was breaking up slightly under a load. So I put in new plugs, wires, Rotor Cap/rotor, coil, new (replaced old one) Pertronix Ignition and a fuel filter and now the engine will not fire! I went over the firing order 1- 4 (Pass side) and 5 - 8 (driver side) and double checked correct wires onto rotor cap etc. And I checked carb...it's pumping fuel into the primary's
Any suggestions would be greatly appreciated...
Thank you,
Rick 66 Vert
Any suggestions would be greatly appreciated...
Thank you,
Rick 66 Vert