New Trickflow Heads

[sspnotcback]

just wondering did anybody hear any more on the new trickflow 11r heads.a release date maybe....

 

[Rick 91GT]

I was told mid September....

Ti retainer version is around $1020/each going of memory. If I van help you with a set let me know...

Sent from my XT907 using Tapatalk 2

 

[srtthis]

im curious to see what kinda power you can make with them over something like a raised runner 20* head

 

[stykthyn]

are these street/strip or a straight up racing head?

 

[Rick 91GT]

are these street/strip or a straight up racing head?

None of the info I have seen has mentioned emissions legality... I just tried trick flow but I forgot they shut down the phones for lunch 12-1pm

Sent from my XT907 using Tapatalk 2

 

[Rick 91GT]

im curious to see what kinda power you can make with them over something like a raised runner 20* head

Yeah I haven't seen any numbers and heard any solid info yet. At $2000 a pair they'd have to be awesome for me to go that route over the new AFR 195...totally bad ass

Sent from my XT907 using Tapatalk 2

 

[stykthyn]

ok, let me rephrase. Is this a suitable head for a street driven stroker or is it best left for the devoted track cars?

 

[Rick 91GT]

ok, let me rephrase. Is this a suitable head for a street driven stroker or is it best left for the devoted track cars?

Be just fine...I've been told they will fit a standard TFS notch piston and based on this angles I believe will add even more PTV so a inline notch should still work just fine also.

Sent from my XT907 using Tapatalk 2

 

[srtthis]

Yeah I haven't seen any numbers and heard any solid info yet. At $2000 a pair they'd have to be awesome for me to go that route over the new AFR 195...totally bad ass

Sent from my XT907 using Tapatalk 2

honestly for that kind of money id start looking towards canted valve heads. i saw a set of new edlebrock Sc-1's with a sheet metal intake with 2 foggers on it and 2 1050 QFX carbs for 5000... hell you can find C3's pretty damn cheap also these days

 

[mikestang63]

have they released any flow #'s on them yet.

 

[Rick 91GT]

Not that I have seen...

Sent from my XT907 using Tapatalk 2

 

[sspnotcback]

well i was looking at them on summits website,they look bad ass.do you guys think it would be a big improvement over the edelbrock performer rpm heads i have on my 351w now.i was kinda leaning toward the 56cc chamber heads to up my already low compression. (dish pistons)

 

[Rick 91GT]

well i was looking at them on summits website,they look bad ass.do you guys think it would be a big improvement over the edelbrock performer rpm heads i have on my 351w now.i was kinda leaning toward the 56cc chamber heads to up my already low compression. (dish pistons)

Personally anything would be better then the Rpm heads you have now...the AFR 195 is a bad head as well and they are a tad cheaper. I'm excited about these TFS offerings been a long time since something truly new was brought out for the small block ford

Sent from my XT907 using Tapatalk 2