Build Thread "Rising from Ashes" 94 Cobra build thread

lolololololololololol.

keep up the amazing work.
Thanks dude!
More parts coming in. Started mocking up fuel system. I've used Aeromotive A1000 pumps in the past, but they have been coming back with issues and I've replaced with this setup, so Dual Walbros it is for this one. Also started getting cooling system pieces. everything will be AN and black.
photo-1.jpg
photo1.jpg
 
  • Sponsors (?)


Trunk and rear work continues
MiniTub46_zpsd35b9254.jpg
MiniTub45_zpsbc0b3b5e.jpg
MiniTub44_zps962cc2ae.jpg
MiniTub20_zpsd11d5207.jpg
Rear lowers
Started shaving and smoothing my intake
Holleyintakeredo6_zps256dae28.jpg
Saleen leather gauge pod
new-6004_zps8f431d3f.jpg
Tail light covers that I started sanding and blocking smooth should be ready for some primer.
new-6008_zps29ff5016.jpg
Custom made headlight knob.
new-6010_zps25c65b59.jpg
new-6012_zps89742141.jpg
 
Last edited:
That hood looks like GLASS!!!!! I cant give u enough comps. Mixing the old color scheme in with the new was simply GENIUS. Excellent excellent excellent. A++++++++ Keep going!!!!!!!!!!!

I looked at the pic of your intake and wanted to ask if you are going to go with a Fox throttle body set up. And if so are you going to run the cruise control. And if so. Can you explain how that is done? Is it dificult. Ive been searching around but cannot find a solid answer. Seems like everyone avoids doing that part of the swap. Thanks sir.
 
That hood looks like GLASS!!!!! I cant give u enough comps. Mixing the old color scheme in with the new was simply GENIUS. Excellent excellent excellent. A++++++++ Keep going!!!!!!!!!!!

I looked at the pic of your intake and wanted to ask if you are going to go with a Fox throttle body set up. And if so are you going to run the cruise control. And if so. Can you explain how that is done? Is it dificult. Ive been searching around but cannot find a solid answer. Seems like everyone avoids doing that part of the swap. Thanks sir.
Thanks man...
Yes, I always run the fox setup. This one will actually have the fox throttle setup as well as fox accessories. I will not be using cruise on this one, but the swap is easy. Just use the fox cruise control cable and swap ends on it.
I'm ready to do something really cool on that upper plenum.
Yeah...I think we can do something :drool:.
 
looking great how are you going to do the trunk ?
Going to bring a roll cage back and sink the battery and fuel cell underneath. Then I'll finish it all out with panels and carpet for a stock look. May even cut down and upholster the back seat for the heck of it.
BTW: I found the wheels we talked about at Carlilse. In fact, I some how ended up buying two sets and I'm going to cut one up and widen in the next two weeks.