Hopefully this is the last time shes on the trailer to be worked on but leaving now to go drop it off to have glass put in it..
Progress Thread Project Copper Can
- Thread starter MikeH686
- Start date
-
Sponsors (?)
Anybody know what the thread size is on the front fender spats its the square piece on the fender that gets golted to both the bumper and the fender itself
http://www.latemodelrestoration.com/item/LRS-10176HDW/87-93-Mustang-Gt-Side-Skirt-Screws
They look like #10 self-tapping and I'm pretty sure they screw into those small, square, plastic nut plates that snap into the fender lip.
Thats for the gt im an lx they have two studs to connect it to the fender and three holes to connect and bolt to the bumper they arent 6mm nuts they might be 1/4 20 nuts
Ok... I think I'm with you now... 
This is what you have:
![lrs-16162b_7536[1].jpg](/cdn-cgi/image/format=auto,quality=80,sharpen=1/https://stangnet.com/mustang-forums/attachments/lrs-16162b_7536-1-jpg.83786/ "lrs-16162b_7536[1].jpg")
If that's correct, then I think that this is what you need (unless the studs are broken off):
http://www.latemodelrestoration.com...er-Quarter-Panel-Body-Side-Trim-Nuts-Set-Of-4
If the studs are broken off, then you need the screws that I posted above to screw into those plastic bosses where the studs were mounted.
This is what you have:
If that's correct, then I think that this is what you need (unless the studs are broken off):
http://www.latemodelrestoration.com...er-Quarter-Panel-Body-Side-Trim-Nuts-Set-Of-4
If the studs are broken off, then you need the screws that I posted above to screw into those plastic bosses where the studs were mounted.
Nope haha those go to the plastiv hard molding rigjt above it because those nuts are the self threading nuts that go around a plastic nipple like the front of fender molding. Im sure ill figure it out ill just have to get my big tap and die set out
Well i snapped a few pics today after i washed the car for the first time and waxed the front clip
Looks amazing!!!
Thanks man hopefully i will have this thing to mir one day ... my fuel pump is giving me issues either my pump is fried or the filter is clogged i jumped the relay out to get it to run and took my guage off and got no fuel but the filter is new and im sure it's the pump it was what was in the car when i bought it and i was a dumbarse and ran the pump low on fuel to much like when i say low i mean i would toss a gallon or two in the car but its not grounded out or anything just wont prime
I want to make baby's with that thing . beautiful !!Well i snapped a few pics today after i washed the car for the first time and waxed the front clip
Sent from my iPhone using my fingers
Roanstang
Active Member
Snapped a few more pics this morning after i cleaned up the inside.
I need to figure out the steering column cover as you can see its pretty pitiful looking with the huge gap to the back of the steering wheel
I need to figure out the steering column cover as you can see its pretty pitiful looking with the huge gap to the back of the steering wheel
The car looks really great Mike. I like the drizzle effect on the intake and console.
(I get to use this now) :grats:
(I get to use this now) :grats:
AMCman10
Member
Man, what a beautiful job! So clean and classy, but with fantastic color and design ideas that really making it pop. I might have to start snooping around the Southern MD cruises to see this thing in person!
Similar threads
