custom chip?

[Black95GT_Kid]

im a little new at doing major mods to a F.I. engine. ive done plenty of carb. engines so i dont know much about custom chips. so the question is what is a good brand chip? Here is a list of the new mods if that helps.
Thanks,
Frank

Rebuild Kit (.030 OB) 306ci
Lifters
Cam (crane #444225)
cobra rockers 1.7 ratio
ported cobra intake
valve springs
King Cobra Clutch
Fuel Pump (190 lph)
Fuel Pressure Regulator
Timing Set (G6620)
Push Rods (FRPP)
Rod Bolts (ARP)
Mass Air Sensor
Fuel Injectors (24lb/hr)
Throttle Body (75mm)

 

[urban96]

SCT

 

[IEatRiceGT]

do you want a mail order chip or are you gonna go with a custom dyno tune?

 

[94gts]

you wont need a tune or chip....

 

[urban96]

try and get in contact with local tunersand see what they use. a tune will make a big difference

 

[wytstang]

try and get in contact with local tunersand see what they use. a tune will make a big difference

+ Uno

 

[fiveo'cobra]

With stock heads, running a 75mm TB is way overkill. You're probably missing out on some serious low down torque. Get a 65 or 70.

 

[urban96]

i have a 65mm tb if you need one