what kind of H.P. will i have and track time

[hernandez]

just built a 347 stroker w/ professional product intake, 70mm tbody & spacer, 75mm MAF, track heat heads, 9.5 compression, n-41 cam, 1.6 roller rockers, CAI, LT headers, custom x, slp loud mouth mufflers, UD pullies, E-fan, 3.73, UL control arms, MT ET street, 30lb fuel injectors, t56, short throw, test drive in one day. thanx

 

[ram360]

Low/Mid 12's 350 hp.....my guess.

 

[jeffbigwood27]

If it is a coupe high 11s if you can drive and cut some 1.55 60s. Otherwise mid low 12s

 

[86bluecobra]

damn hate it when guys can get 11's N/A and i have to do it with juice. you would definetly need to cut 1.5's-1.6 sixty foots to get 11's. be happy when you run 12's.

 

[gcwh02]

id have to say around 350 horse and low 12's

 

[hernandez]

How can i get in the 11s with no problems, that is my goal to get in the 11s with out even trying

 

[ram360]

How can i get in the 11s with no problems, that is my goal to get in the 11s with out even trying

use a power adder

 

[Grn92LX]

Mid 11's if it hooks. 12's if it doesn't.

I'm hoping for deep 11's with mine with enough mph for 10's.

 

[hernandez]

do you think the N-41 is too small for my setup and go with a tfs stage 2 cam, my friend says he will trade me if i were interested.

 

[mustangmarks]

How can i get in the 11s with no problems, that is my goal to get in the 11s with out even trying

Just lie to everyone

 

[hernandez]

small steps first hero! 11s are good for now, and in a year or two then 10s, like i said is the N41 too small for my setup? do you guys think that a tfs stage 2 cam will work better

 

[Joe P.]

The N-41 might be too small for your 347, I run one in my 302. TFS stg 2 might be a better choice...

 

[Grn92LX]

Hands down keep the N41 over the junk tfs 2. If you want to switch cam's, look into a bigger AFM cam or a custom. If you want the most out of the combo, you will need to step up the gear and manifold.

 

[hernandez]

just bought a holley system max II intake for 245.00 upper from turbomustang.com for 200 shipped and lower from corral.net for 45 shipped. sold the typhoon intake now looking for a cam thinking of stage 2 from tfs or one from comp cams

 

[Grn92LX]

You sure that lower is a systemax II and not a systemax I? A systemax I is a stock replacement lower for a stock upper. If its a II, thats a killer manifold for your combo. It'd run real hard with an AFM N91 hi rev cam and 4.30 gears

 

[the98stang]

238838272739238.3 RWHP

Seriously though you'll run low 12's

 

[25thmustang]

Low 12s are nothing, get a custom grind and go for deep 11s!

Your best bet is call up a cam guru and tell him what you got, and what you want to do, and spend the money. You wont be disappointed!

 

[hernandez]

i am sure that it is a holley system max II upper and lower they showed pics. custom cam huh? any one know of someone that does custom cams,

 

[fidstang]

Ed Curtis of Flowtech(Holley). Keep praticing your luanches and you'll break into the 11's. Hell if 302's can do it (even though they're gutted with no accesories) you should be able to tweak it to 11's.