Welllll i got my new heads in today. They aren't those aweeesome Canfields i won on ebay a few weeks ago because the bastard ebayer prolly thought he could get more for them elsewhere and just never contacted me or sent them after i won the auction. Thank god i didn't send him the $1300 for them right away.
soooooo finally got a set of heads i think i'm going to stick with. Since i had to switch to stud mounts, i ordered some scorpion 1.72's with them.
Specs on the heads:
Edelbrock Performer RPM's---CNC ported and milled to 57cc.
2.02/1.6 valves
Triple valve springs
ARP head studs
valve job
Titanium retainers
10* locks etc
Just shooting the breeze.........was wondering what you guys think numbers and times would be normal for this combo with a good tune so i know what to shoot for. Rest of the combo is:
E cam
Ported cobra intake
longtubes
4:10's with beefy diff
555 DR's
allllllllllllllllll the bolt ons in suspension, drivetrain, engine, fuel, ignition, etc
Here are some pics btw:
View attachment 468248
soooooo finally got a set of heads i think i'm going to stick with. Since i had to switch to stud mounts, i ordered some scorpion 1.72's with them.
Specs on the heads:
Edelbrock Performer RPM's---CNC ported and milled to 57cc.
2.02/1.6 valves
Triple valve springs
ARP head studs
valve job
Titanium retainers
10* locks etc
Just shooting the breeze.........was wondering what you guys think numbers and times would be normal for this combo with a good tune so i know what to shoot for. Rest of the combo is:
E cam
Ported cobra intake
longtubes
4:10's with beefy diff
555 DR's
allllllllllllllllll the bolt ons in suspension, drivetrain, engine, fuel, ignition, etc
Here are some pics btw:
View attachment 468248