Best Cam For 85 GT

[FIRST FOX]

Looking for the best hydraulic roller cam for my 85GT. Here's what I have so far. Thanks.

85GT, 5-speed, 3.73 gears, stock bottom end
Trick Flow Twisted Wedge 170's
Ford Racing 1.6 Roller Rockers
Weiand Stealth Intake
Holley 650 DP
Shorties, Offroad H-Pipe, No Cats
Looking for a good street/strip cam with a broad rpm range

 

[blackstang85]

i have almost the same set up only dif is i have 4:10 and i have the trick flow 1 cam and dont have any clearance issues...

 

[Mustang5L5]

The TFS1 was designed around those heads..so that would be my #1 recommendation

 

[FIRST FOX]

Thanks. I have considered the Stage 1 cam. So no PTV issues with the Stage 1 cam, stock 85 pistons and twisted wedge heads? The heads I bought are used so I plan on having them milled to make sure they are flat plus boost compression a little. Heads are 61cc. What is a safe amount using the 85 pistons and the stage 1 cam? Compression Ratio?

 

[joel5.0]

The TFS1 was designed around those heads..so that would be my #1 recommendation

What about the TFS2? .... Wasn't it also "designed around those heads"?