I have a 2000 gt coupe with the mach 460 audio system and I want to replace it with an aftermarket receiver. I have pulled the factory deck and hooked up the aftermarket deck with the wiring harness' supplied. The problem is that every wiring harness that I have been able to find does not have a connector for the 6 pin connector. With this being said, I have power to the deck, but no sound because I don't have the six pin connector hooked up. How or where do I wire in the six pin connector? What I have done so far with the wiring is....gray plug to the deck, ant to ant connection, 8 pin to speakers, black ground wire to ground, 6 pin to ?.....HELP!
Mach Audio Replacement
- Thread starter Corrosion
- Start date
-
Sponsors (?)
I could be misunderstanding what you are saying but, I believe you need a plug that turns the 6 pin into rcas and then you plug those into your front and rear rca inputs in the back of your receiver. This is so your 460 amps can get signal to run your speakers. Try this http://www.crutchfield.com/p_120705510/Receiver-Wiring-Harness.html?tp=2977
twogts4us
15 Year Member
Please take a look at my thread (http://www.stangnet.com/mustang-for...uestion-re-parking-brake.857279/#post-8627552) and help us out with some pics of the back of the radio and the harness you are using.
Similar threads
