Hello everyone! Long time lurker on the forum, finally have started my own build. The car is a Factory Five 33 Hot Rod kit which will be powered by a GM LS1,T56 transmission, and Ford 8.8 three link rear end. As some of you may know the factory five kits use a lot of Mustang parts so I've been able to get some great info to help the build on this forum. Here is a video describing the details of the project and I will be vlogging the entire build of the car. Please subscribe to the Youtube channel to see the build progress. There is also pictures of the build on my Instagram @dizzymarcus. I will also be posting the new videos here. Let me know what you think, thanks!
Factory Five 33 Build.
- Thread starter The_Compound
- Start date
-
Sponsors (?)
Fug off dude.
Thanks for destroying another ford with a gm product. (I know it's a kit car but it is a 33 ford)... why not a mod motor?
What do you plan on doing for the efi setup?
Thanks for destroying another ford with a gm product. (I know it's a kit car but it is a 33 ford)... why not a mod motor?
What do you plan on doing for the efi setup?
I like the simplicity and compactness of the GM LS motors. It's a really tight fit in the Factory Five. I know guys have built them with Coyote engine but I don't know how they would ever manage to work on them once they are in there. Also $/HP it's very hard to beat.
For the EFI setup ill be using the wiring harness and tuning the PCM that came with the Camaro LS1.
For the EFI setup ill be using the wiring harness and tuning the PCM that came with the Camaro LS1.
nickpic
Advanced Member
Ok, I want to build one of these myself at some point. What did the kit cost you? What about the interior?
Thanks!
If you live in the US the complete kit from Factory Five is $20K USD plus whatever options you would like to ad on. I live in Canada so once shipping, exchange rate, and options were factored in it was about $30K CAD. The kit does come with an interior; seats, door panels, carpet, etc... I will be doing a video on the interior once the build has progressed to that stage.
10-4 I will follow along. If you need any advice wiring wise or tuning we have a section for that as well. Although with the stock ecu I doubt you will have issues.
skyline247
Advanced Member
Similar threads
