- Dec 24, 2017
- 34
- 3
- 8
So I installed a replacement 2001 power distribution harness and.. no power what so ever to anything in the car. I'm getting 12v at the BJB post, I have good continuity between the fuses and the BJB post as well. The grounds that connect at the BJB (yellow/black and black on two pin connector) check out.
Any ideas? It's gotta be something big and obvious, I would hope.
Car was doing fine on the 1999 power distribution harness I replaced. I will say the connector in the driver side fenderwell is strange. It seems loose, but I tightened down as far as I reasonably could. Wiggling it doesn't fix anything.
Any ideas? It's gotta be something big and obvious, I would hope.
Car was doing fine on the 1999 power distribution harness I replaced. I will say the connector in the driver side fenderwell is strange. It seems loose, but I tightened down as far as I reasonably could. Wiggling it doesn't fix anything.