my parts finally came in . the doors are very nice ,about the straightest i have seen. however the grain is not correct . it is much heavier than the original ,more like a crinkle finish. the fit is wonderful though .the driver door bolted on with out having to adjust the hinges.the pass. side needed just a bit to make it fit . the fenders are close but not that good. the gap between the door and fender is uneven but nothing that cant be easily fixed. the big problem is the inner brace is not welded in .it is welded at the top and at the bottom but not one spot weld in the middle.
i cut the radiator support and battery apron out and replaced it with the support with the cross brace welded in place already. this is a nice and heavy piece .i spot welded it in along with the battery apron. the fenders are just setting in place but it already looks great. it is ready for the rotisserie now.